You have no items in your shopping cart.
Product Description
Rockford Fosgate amplification at an unbelievable value. The R500-1 mono amplifier pumps out 500 watts into a 2-ohm load, perfect for a pair of R1S410 10" or R1S412 12" woofers.
Number of Channels 1
Rated Power
(RMS Continuous Power) 320 Watts x 1 @ 4-Ohm
500 Watts x 1 @ 2-Ohm
Total Power
(Sum of Rated Power) 500 Watts RMS
Dynamic Power
(PVC/PowerCube® Measurement) n/a
Bridgeable No
Efficiency (average) 67% @ 4-Ohm
58% @ 2-Ohm
Crossover Controls Low Pass (LP): 40Hz-130Hz @ 12dB/octave Butterworth
Tone Controls Punch Bass: 0dB to +12dB @ 45Hz
Signal Input Low Level: 1 RCA pair
Signal Output Low Level: 1 RCA pair
Power Input Connector Screw terminal barrier strip
Power Wire Gauge 4 AWG
Speaker Output Connector Screw terminal barrier strip
Speaker Wire Gauge 8 AWG
Heat Sink Type Extruded Aluminum
Cooling Convection
Remote Controls Punch Level Control
(when connected, is linked to "gain control" to provide remote output level)
Visual Indicators Power
Protect
Circuit Topology Class Class A/B
Frequency Response 20Hz to 250Hz +/-1dB
Number of Channels 1
Rated Power
(RMS Continuous Power) 320 Watts x 1 @ 4-Ohm
500 Watts x 1 @ 2-Ohm
Total Power
(Sum of Rated Power) 500 Watts RMS
Dynamic Power
(PVC/PowerCube® Measurement) n/a
Bridgeable No
Efficiency (average) 67% @ 4-Ohm
58% @ 2-Ohm
Crossover Controls Low Pass (LP): 40Hz-130Hz @ 12dB/octave Butterworth
Tone Controls Punch Bass: 0dB to +12dB @ 45Hz
Signal Input Low Level: 1 RCA pair
Signal Output Low Level: 1 RCA pair
Power Input Connector Screw terminal barrier strip
Power Wire Gauge 4 AWG
Speaker Output Connector Screw terminal barrier strip
Speaker Wire Gauge 8 AWG
Heat Sink Type Extruded Aluminum
Cooling Convection
Remote Controls Punch Level Control
(when connected, is linked to "gain control" to provide remote output level)
Visual Indicators Power
Protect
Circuit Topology Class Class A/B
Frequency Response 20Hz to 250Hz +/-1dB
Additional Information
| Manufacturer | Rockford Fosgate |
Product Tags
Add Your Tags:
Use spaces to separate tags. Use single quotes (') for phrases.
